manualshive.com logo in svg

Agilent Technologies 1660A Series, User Reference

Share
Download
Agilent Technologies 1660A Series User Reference Download Page 188

Label Assignment Fields

The label assignment fields display the user-defined label names.  Custom
label names are used when there are different types of data which must be
tracked.

The label column contains 126 label fields that you can define.  The analyzer
displays only 8 labels at any time.

The default label names are Lab1 through Lab126.  However, the names can
be modified to any six character string by highlighting the field, then typing
in the new name.  In addition, when any label field is selected, a pop-up menu
appears which is used to modify the label list.

See Also

"Label and Pod Rolling Fields" found earlier in this chapter for information on
rolling offscreen labels back onscreen.

Label Field

Label field

Label assignment menu

The Format Menu

Label Assignment Fields

11–30

Summary of Contents for 1660A Series





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands