AGI Batco 1500 Series: Batco FX1535FL, Assembly Manual

Page: 93 / 128

P1512115 R8 93
Figure 71. Frame Stabilizers
4.25.3 Install the Hydraulic Pump, Gearbox, and Belt Tightener
1. Assemble the hydraulic pump engagement handle (1) (see Figure 72 ) as follows:
a. Attach the pivot handle (2) to the pivot shaft (3) using a 3/8" x 2-1/2" bolt (4), a 3/8" locknut (5), and six
3/8" washers (6).
b. Attach the 1/4" x 2-1/4" quick pin (7).
2. Install the fittings (24, 25) on the hydraulic pump (see Figure 73 ).
3. Install the pump mount plate (8) and hydraulic pump (9) onto the gearbox mount (10) using 3/8" x 1-1/2"
carriage bolts (11), and 3/8" locknuts (5).
Note
Make sure the orientation of the fittings and direction arrow on the pump are as shown as the
pump is mounted.
4. Thread the end of the pivot shaft (3) into the nut of the pump mount plate (8).
5. Install the gearbox mount (10) onto the engine platform using four 1/2" x 1-1/2" hex bolts (12) and 1/2"
locknuts (13).
6. Install the gearbox (14) on top of the gearbox mount (10) using four 1/2" x 1-1/2" hex bolts (12), 1/2" lock
washers (15), and 1/2" flat washers (16) (see Figure 74 ).
Note
Do not tighten the gearbox bolts at this time.
4
7
1
8
3
2
5
3
1
8
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER 4. ASSEMBLY