90
P1512115 R8
4.25. Install the Under-Mount Gas Drive (Option for FX1545FL
Only)
4.25.1 Install the Drive Mount and Platform
1. Install the crossbar mount (1) to the conveyor tube using 7/16" x 1" bolts (2) and 7/16" locknuts (3) (see
).
Note
Orient the crossbar mount precisely as indicated in
.
2. Install the hopper-side mount arms (4, 7) onto the crossbar mount using 3/8" x 1-1/4" bolts (5) and 3/8"
locknuts (6).
Note
In this section, the left and right sides are defined by viewing from the conveyor’s hopper toward
the spout.
Note
Do not tighten the mount arm bolts. They will be squared and tightened later.
3. Install the spout-side mount arms (11, 12) onto the crossbar mount using 3/8" x 1-1/4" bolts (5) and 3/8"
locknuts (6).
4. Install the engine platform (8) onto the bottom of the mount arms using 3/8" x 1" bolts (9) and 3/8"
locknuts (10).
Table 39.
Crossbar Mount, Mount Arms, and Engine Platform
Item
Description
Quantity
1
Crossbar Mount
1
2
7/16" x 1" Flange Bolt
4
3
7/16" Flange Locknut
4
4
Hopper-side Left Mount Arm
1
5
3/8" x 1-1/4" Flange Bolt
6
6
3/8" Flange Locknut
6
7
Hopper-side Right Mount Arm
1
8
Engine Platform
1
9
3/8" x 1" Flange Bolts
12
10
3/8" Flange Locknut
12
11
Spout-side Left Mount Arm
1
12
Spout-side Right Mount Arm
1
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
