58
P1512115 R8
Figure 38.
Holding Upper Frame with Bungee Cord
4. Slide the lower frames into the hopper cloth, as described in a previous hopper cloth section (see
).
5. Attach the hopper cloth to the conveyor (see
):
•
First, attach the front of the hopper cloth to the front flashing. Afterward, attach the sides.
•
Drill through the hopper cloth and use the existing holes as a guide through the lower frames, flashings,
and hopper weldment.
•
Fasten using 1/4" x 1-1/4" elevator bolts (5) and 1/4" nuts (6).
6. Attach the lower back frames to the hopper using 1/4" x 1" self-tapping screws (7), 1/4" flat washers (8),
and vinyl screw caps (10).
7. Install trimlock (9) with a rubber mallet onto the upper frame of the hopper cloth.
Table 17.
Components for Installing the Hopper Cloth onto the Conveyor
Item
Description
Quantity
1
Upper Side Frame
2
2
Shaft Bracket
2
3
3/8" x 1" Hex Bolt
4
4
3/8" Nut
4
5
1/4" x 1-1/4" Elevator Bolt
22
6
1/4" Nut
22
7
1/4" x 1" Self-tapping Screw
4
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
