28
P1512115 R8
Table 1
Safety Decals (continued)
Part Number
Description
P1513022
PRETENSIONER
NUT
TAKE-UP ROLLER
X
To prevent belt damage, use correct belt tension and do
not attempt to adjust belt tracking with the take-up roller.
To set correct belt tension:
• While conveyor is running empty, fully tighten nut against the
pretensioner (take-up pipe) so that spring is not visible.
• Ensure take-up roller is tensioned equally by using a tape to
measure distance “X”.
• After the conveyor belt has been tensioned, check the alignment
of all other s-drive rollers and periodically afterward.
See manual for complete instructions.
NOTICE
P1513049
Lubricate belt release
and motor mount sliders
with silicone or light oil.
IMPORTANT
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
