76
P1512115 R8
4.24.5 Install the Rocker Arm
1. Insert the rocker arm pivot shaft (1) into the motor mount back plate (see
).
2. Attach the rocker arm sleeve (2) and a 1" flat washer (16) with a 3/8" x 2" bolt (3) and 3/8" locknut (4).
Table 32.
Rocker Arm Components
Item
Description
1
Rocker Arm Pivot Shaft
2
Rocker Arm Sleeve
3
3/8" x 2" Bolt Gr8 Plated
4
3/8" Nylon Locknut
16
1" Flat Washer
17
1/2" x 5" Tap Bolt
18
1/2" Hex Nut
Figure 55.
Installing the Rocker Arm Pivot Shaft
Important
If your conveyor has a gas engine drive installed on it, you must also install a soft start electric
clutch. If your conveyor has an electric motor installed on it, this drive will not have a soft start
electric clutch installed on it.
Æ
3.
For models with a gas engine and soft start electric clutch:
Fasten a 1/2" x 5" tap bolt (17) and a 1/2" hex
nut (18) through the tab on the back of the motor mount side plate (see
).
3
2
16
1
4
3
2
16
1
4
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
