26
P1512115 R8
Table 1
Safety Decals (continued)
Part Number
Description
P1513136
As part of the fuel vapour retention system, it is normal for
your tank to expand from internal pressure. Use the vent
screw to relieve pressure and before refueling.
CONTENTS MAY BE UNDER PRESSURE
WARNING
To remove cap:
1. Open VENT SCREW on top of cap FULLY.
2. Locate Pressure Relief Tab under cap.
Turn cap until Pressure Relief Tab Lock
engages.
3. Press down on tab, rotate cap 1/4 turn (to
relieve pressure before opening tank) and
release tab. STOP. Lock may engage
again.
4. PRESS Pressure Relief Tab down again
and turn slowly to remove cap.
To tighten cap:
• Turn Closure caps until an audible “click” is heard.
Failure to follow may result in fuel spillage.
P1513039
For proper raising and lowering of equipment:
• After lowering equipment, always tighten brake lock
by turning winch handle clockwise at least two clicks.
• Rotate winch handle until cable has light tension,
when in towing position.
• Do not lubricate winch brake discs.
• Inspect lift cable periodically; replace if damaged.
• Inspect cable clamps periodically; tighten if necessary.
CAUTION
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
