36
P1512115 R8
Note
The square-head set screws are used to set the alignment of the belt, after the belt is installed.
Table 4.
Spout Roller Components
Item
Description
Quantity
1
Spout
1
2
Lagged Spout Roller
1
3
1/2" x 1–1/2" Carriage Bolt
4
4
Square Flat Washer (0.531"-1.00"-0.060")
4
5
1-1/2" Bearing Flange Unit (SAFL208–24)
2
6
1/2" Nylon Locknut
4
7
7/16" x 2-1/2" Square-Head Set Screw
2
Figure 13.
Installing Spout Roller
1
7
2
3
4
5
6
1
7
2
3
4
5
6
d
4.8. Install the Frame Slider
1. Slide the slider (2) onto the track (see
).
2. Install the cable attach (6) on the track with 7/16" x 1-1/2" bolts (3), 7/16" locknuts (4), and flat washers (5).
3. Install the trackstop (1) on the track with 7/16" x 1-1/2" bolts (3), 7/16" locknuts (4), and flat washers (5).
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
