P1512115 R8
35
Figure 11.
Conveyor Tube Layout for FX1545FL Model
15020030
15020033
15100040
4.7. Install the Spout Roller
1. Insert the roller (2) into the spout (1) (see
), with the roller lagging pointing in the direction of belt
travel (see
Figure 12.
Spout Roller with Lagging Pointing in Belt Travel Direction
Belt Direction
2. Slide a bearing (5) on each end of the roller and secure to the spout using 1/2" x 1–1/2" carriage bolts (3),
square flat washers (4), and 1/2" locknuts (6).
3. Center the roller (2) in the spout.
4. Make sure the roller (2) is positioned straight by measuring the distance (d) from the end of the roller to the
end of the spout weldment sidewall on both sides (it should be the same distance).
5. For each bearing, use a hammer and punch to rotate the lock collar so that it seats onto the inner race of
the bearing. Tighten the lock collar securely to the shaft with its hex set screw.
6. Insert the 7/16" x 2-1/2" square-head set screws (7) in the spout.
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
