78
P1512115 R8
Figure 57.
Installing the Push Rod
3. Attach the anchor bracket (9) and 10" x 2-1/2" u-clamp (10) to the tube with 7/16" x 1-1/2" bolts (11) and
7/16" locknuts (12) (see
4. Tighten the u-clamp until the tube begins to crimp.
5. Bolt the handle (13) to anchor bracket (9) with a 1/2" x 2-1/2" bolt (14) and 1/2" locknut (7).
6. Connect the adjuster to the handle with a 3/16" x 1-1/2" cotter pin (15).
Table 34.
Overcenter Handle Components
Item
Description
9
Motor MT Over-Center Anchor Bracket
10
10" x 2-1/2" U-clamp
11
7/16" x 1-1/2" Hex Bolt
12
7/16" Nylon Locknut
13
Motor MT Over-Center Handle
14
1/2" x 2-1/2" Hex Bolt
15
3/16" x 1-1/2" Cotter Pin
7
6
8
5
7
6
8
5
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
