96
P1512115 R8
Figure 74.
Installing the Gearbox and Belt Tightener
4.25.4 Install the Gas Engine
1. Install the engine adjustment plate (1) and engine (2) onto the engine platform using four 3/8" x 2" hex
bolts (3), 3/8" flat washers (4), and 3/8" locknuts (5). At the same time, secure the ground wires for the
battery and clutch to the motor mount bolt (3) (location indicated by the red arrow) using a 3/8" flat washer
(4) (see
).
Important
Installation and wiring for the gas engine are to be done by a certified technician and should be
based on OEM (original equipment manufacturer) specifications. Some hardware has been included
in the drive kit. Not all installations will require all parts. After the conveyor is completely
assembled, place finishing zip-ties on all cables and wiring to ensure all lines are snug in place.
2. Remove the plug insert (6) and assemble the square plug (7), elbow (8), and drain pipe (9) into the engine’s
oil drain port.
Table 42.
Engine Components
Item
Description
1
Engine Adjustment Plate
2
Engine
3
3/8" x 2" Hex Bolt
20
21
23
18
17
22
5
19
10
17
16
14
12
16
15
15
12
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
