AGFEO AS 100 IT, Manual

Page: 51 / 204

1 - 43
System Telephones
ST 20/25 DECT 30 ST 30
An ISDN terminal that is connected in parallel to the telephone system on a point-to-
multipoint line and to which the same number as the system has been assigned will always
ring, regardless if BUSY ON BUSY is active or not.
The receiver is on hook.By pressing
the BUSY ON BUSY Button you switch
this feature on or off.
-/
Busy on Busy on/off
Notes
Voice Message
Announcement
You can use your telephone system like an intercom,i.e.you can make a voice message
announcement to other system telephones connected to the system in the form of a:
-Announcement to one, a group or all system telephones
-Announcement to a defined group of system telephones (see “Group formation ”).
The speakers of the system telephones receiving the announcement are automatically
switched on, unless they are busy on another call.
You can also make a voice message announcement out of an external call.
A voice message is only possible if you have programmed a function button as VOICE
MESSAGE (Announcement) see also function button assignment.
Voice Message to System Phones
-%
Z
$
+
=
-
With the receiver on hook.
Press the ANNOUNCEMENT BUTTON
You now can select an extension number
or a group number. If no number is
selected all system phones will receive
your announcement.
Press the ENTER button and make
your announcment either using the
receiver or in handsfree mode.
If at least one of the system phones is
free to receive your announcement then
you and the recipient will hear the
acknowledgement tone.
If an extension picks up the receiver
during an announcement then you will be
connected to this extension and the
announcement mode will be cleared.
After your announcement, replace the
receiver or press the SPEAKER button.
or
1 - 43
-
/
-
%
Z
$
+
=
-
A
z
A
z
Z
H
D
or