AGFEO AS 100 IT, Manual

Page: 50 / 204

1 - 42
System Telephones
ST 20/25 DECT 30 ST 30
Switch Auto Dialling on/ off
!
1*
z
!
Press SET 1 *
Press 1 for off
or
Press 2 for on
Press SET to end programming
If the called party is busy, the telephone system attempts to redial the external phone
number every 10 seconds. It cancels automatic dialling after 12 attempts.
The Auto Dial function has preference above all other connections. This means should all
lines be busy then the Auto Dial feature will force release a line in order to establish a
connection.
If you hear the error tone when activating AUTO DIALLING, then no external phone
number has been programmed.
Notes
This feature is used in the following situation. If an incoming line is programmed to ring
several phones, then each time a new call arrives the free extensions within the group will
ring. If, however, for some reason your are the only one in the office and are already on a call
then the next incoming call would cause the free extensions to ring. It may not be possible to
answer the new call in time and therefore the caller may get the impression that no one is in
the office. If Busy on Busy is set on the other hand than any extension within the ringing
group who is on a call will cause for a new caller to hear busy tone. Note: This will not place
restrictions on outgoing calls.
Busy on Busy
Busy on Busy - Programming and Switching
Press SET and Press the BUSY on BUSY Button
or Press SET 1 #
Select the line or name
“1 ”:Busy on busy on
“0 ”:Busy on busy off
Press NEXT to select another number
or
Press SET to end programming
!/
&
&
z
&
!
!1*
z
!
!/
&
&
z
&
!
AQ1N
z
HD
AQA
z
J
J
z
J
HD