AGFEO AS 100 IT, Manual

Page: 150 / 204

2 - 46
Analogue and
ISDN-Phones
Display Call Charges on an analogue phone
On an analogue phone, you only can display call charges if the phone has a meter. To display
call charges, you must activate communication of the charge pulses for your phone on your
phone.
If you have requested the „communication of call charges during and at the end of the
connection“feature from your network carrier, your phone continuously displays the call
charges during a connection.
You can display the charges of your last connection that are stored in the telephone system
at any time. To do this, it suffices if you have requested the „communication of connection
charges at the end of the connection“ feature from your network carrier.
Display charges of the last connection
Communication of charge pulses on / off
Notes
If you wish to display the charges of the last connection by entering
S44
, please note
that your telephone’s totalizer may total up the costs of the last connection.
For technical reasons, the data on the network carrier’s invoice may deviate from the total
call cahrges displayed by the telephone system. The charge units counter in the network
carrier’s exchange is always binding.
h P S52P Z Q P ª
Enter the digit: Lift receiver Communication of
charge pulses
Replace receiver
Acknowledgement
tone
1 = on
0 = off
h P S44 Q P ª
Lift receiver Display charges of the
last connection Acknowledgement
tone; wait until the
display appears Replace receiver