AGFEO AS 100 IT, Manual

Page: 193 / 204

A - 11
Resetting the telephone system
By resetting, you can restore the telephone system’s programming to a defined state. This
may be necessary if you wish to reset unclear settings or if you wish to reprogram the
telephone system.
After a reset, the telephone system again operates according to the previously set program.
All settings made in the programming mode or by means of the PC program are retained
provided the programming mode has been ended properly.
Important: the following are cleared when you reset the telephone system. - All existing
internal and external connections
- Remote support
- Internal return calls
- ISDN callback on busy
- Outside line reservations
Hardware reset - unplug the 230 V power mains plug and then plug it in again.
Software reset - carry out the following procedure:
Software reset via analog
terminals / ISDN terminals
Softwarereset via
Systemtelephones
! 9#
&
$
$
Start the function.
Watch the display: If the setup code is
requested after pressing the 9, you have
to enter the 4-digit code.
„next“: Scroll to the „Clear memory“
menu
„enter“: Start clear memory (reset the
ex-factory state of the system), a security
prompt appears
„enter“: Confirm clear memory if you
really want to continue.
The memories are cleared (approx. 2
minutes). (all data are cleared and the
programming is ended automatically)
What to do in the
event of malfunctions
A - 11
h P S 734 Q P ª
Reset the telephone system Acknowledgement
tone Replace handset Lift handset
Programming mode must be started by entering:
h
P
S705
Q
ª
The reset is performed.