AGFEO AS 100 IT, Manual

Page: 19 / 204

1 - 11
System Telephones
ST 20/25 DECT 30 ST 30
Status Display & Date/ Time
!
291
&
$
&
$
!
!
292
&
z
!
&
?
$
To set the status display of the S0 ’s:
Select a free space in the display with
“next ”,confirm with “enter ”,select the
S0 whose status is to be displayed with
“next ”,confirm with Enter.
Set other S0 or exit programming with
set.
Setting the status display of the internal
number:
Select a free space in the display with
“next ”,enter the internal number whose
status is to be displayed.
Set other internal number or exit
programming with set.If you have not
entered an internal numbers you have an
undefined status display.
To clear a position,select this with “next”,
and clear with “Clr ”and confirm with
“Enter ”.
In the DECT 30 you can only clear
all status entries together.
Under normal circumstances you do not need to set the date and time as this is done
automatically from the ISDN network when a call is made. Winter and Summer times are
also set automatically. However, this service is not available from the UK network providers
and therefore the system has to be user set.
To Set Date & Time
!291
&
$
&
$
!
!292
&
z
!
&
?
$
AQ291
IJ
H
IJ
H
D
AQ292
IJ
z
D
AC
H
Set Date & Time
You can set the Date and Time with the
following procedure:
Start Programming with:
*705
Set Time with:
Set Date with:
End Programming with:
*700
*7381
HHMM
*7382
DDMMYY