AGFEO AS 100 IT, Manual

Page: 126 / 204

2 - 22
Analogue and
ISDN-Phones
Malicious Call Identification (MCID)
This feature will have to be supplied by your network provider.
The ISDN exchange will store the callers number and the date and time of the call.
This trace can be activated during the call or after the caller has hung up but must be
activated before you terminate the call.
Tracing a Call
You can continue the call after
rS14
.
Until you return to the caller he will hear Music on Hold if applicable.
You hear the error tone if:
-Malicious Call Identification has not been made available by your network operator
OR
-when the caller could not be identified by the telephone exchange.
Notes
Conference
Three Party Conference via your Phone System
You can hold a three party conference with analogue or digital extensions of the system.
Or with one external call and one extension
Or with two external calls. Note you will use 2 lines (B Channels)
Three Party Conference via the ISDN Telephone Exchange (PTMP lines only)
Note this service is a feature of the Telephone Exchange and may not be available.
To establish a three party conference via the exchange you must first establish the call with
the first paty. Then hold the call in the exchange to establish an enquiry call on the same line
to the second party after which you will switch to a three party conference.
T P r P S14 Q P ª
Conduct external
call Replace receiver Acknowledgement
tone Identify caller Enquiry