AGFEO AS 100 IT, Manual

Page: 144 / 204

2 - 40
Analogue and
ISDN-Phones
Setting COLP to on / off
Setting CLIP to on / off
Notes
Diversion from - Divert other Extensions
h P S67P Z Q P ª
Lift receiver COLP Replace receiver Acknowledgement
tone
1 = on
0 = off
On / off:
h P S68P Z Q P ª
Lift receiver CLIP
Replace receiver
Acknowledgement
tone
1 = on
0 = off
On / off:
h P S571 P Z Q P ª
Lift receiver Diversion from -
on
Enter the number of the
phone from where you
wish to divert calls
Replace receiver Acknowledgement
tone
h P S570 Q P ª
Lift receiver Diversion from -
off Replace receiver Acknowledgement
tone
Your complete number will be send to the network consisting of STD Code and DDI number
or STD Code and MSN number, depending if the line is for system access (PTP) or standard
access (PTMP). You must transmit a valid number belonging to you. If you transmit a
number which is outside your allocated range then the telephone exchange will
automatically replace this number with the main number allocated to the ISDN 2 e circuit.
Call charges cannot be billed by Network provider under seperate MSN numbers
Therefore change to the following.
To transmit a specific MSN number back to the exchange dial the following without 9
S00
-MSN-
R
-external phone number.
You can divert other extensions to your own which may momentarily not be staffed. After
the diversion is enabled, the diverted phone will not ring for any further calls. Calls can still
be made normally from the diverted extension. A special dial tone will remind the diverted
extension that a feature is enabled.
Diversion from - on
Diversion from - off