AGFA DX-D 300, User Manual, Page: 54 / 104

DX-D 300 U-Arm
User Manual
46
0171F EN 20181009
The Control Box is provided also with an Emergency-OFF Switch that cuts the
power supply to the Unit. Once pressed, wait one minute before turning ON the
Unit again.
IN THE EVENT OF AN EMERGENCY FORCIBLY DEPRESS
THE X-RAY ROOM “EMERGENCY OFF SWITCH” (USUALLY
A RED MUSHROOM-SHAPED SWITCH).
THIS SWITCH SHOULD BE LOCATED ON OR NEAR THE
X-RAY ROOM ELECTRICAL CABINET, USUALLY PLACED
NEAR THE GENERATOR CONTROL CONSOLE. MORE THAN
ONE OF THESE SWITCHES MAY BE PLACED AROUND THE
ROOM FOR GREATER ACCESSIBILITY.
TO ISOLATE THE EQUIPMENT FROM MAINS, TURN OFF
THE SWITCH LOCATED AT THE ROOM ELECTRICAL
CABINET.
BEFORE POWERING ON THE UNIT CHECK THAT THERE IS
NOTHING ON THE DR DETECTOR ASSEMBLY SURFACE OR
ON THE U-ARM.
IN THE EVENT OF A STRONG BUMP ON THE DR DETECTOR
ASSEMBLY OR ON THE U-ARM, PLACE THE UNIT IN
THORAX POSITION, TURN THE UNIT OFF, WAIT ONE
MINUTE AND TURN IT ON.