Controls, Connections and Set Up Procedures
DD+DIS150.05E
Printed copies of this document are not controlled.
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Chapter 1 / 22
Drystar 5302
Edition 1, Revision 0
The printer switches automatically to cubic Bell interpolation by evaluation of
the DICOM communication when no image scaling (i.e. magnification or
reduction) is required:
Cubic HighRes interpolation type does not sharpen the image.
Interpolation type 'Cubic Bell' sharpens the image however, independent
whether scaling is required or not.
This automatic switching is only performed in case the Interpolation Type is
adjusted to 'cubic high res' in the user profile (= default).
This behavior can be switched off via browser pages: Path "Service Tools -
Scaling Setup"
Reduction icon on image:
Kernel: when no image scaling is needed for CubicHighRes:
Use CubicBell smooth factor: ( >= 0.1 and <= 10 )
Changes require reboot
Automatically switch to CubicBell:
yes
yes
0.9
OK
HOME HELP
Controller Setup
536401GN.CDR
Figure 15
Agfa Company Confidential
(Typ
5366/100)
2005-09-09
