manualshive.com logo in svg

AGFA DRYSTAR 5302 100, Service Manual, Page: 352 / 465

Share
Download
AGFA DRYSTAR 5302 100 Service Manual Download Page 352

WARNING:

Improper operation or service activities may cause damage or injuries.

(1)

(2)

INSTRUCTION:

Read the "Generic Safety Directions" document
(see Agfa HealthCare Library > General Info  >  Agfa HealthCare  > Publications  >
Service Manual) prior to attempting any operation, repair or maintenance task on
the equipment.
Strictly observe all safety directions within the "Generic Safety Directions" and on
the product.

 

DD+DIS050.05M

Spare Parts List

Edition 1, Revision 4

Chapter 5 / Page  2  of  20

DS 5302 / CRYSTAL IMAGER

Type 5366/100/300

Agfa Company Confidential

09-2013

DOCUMENT CONTROL NOTE:

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.

WARNING:

Hazards may be introduced because of component failure or improper
operation.

•     Replace defective parts with Agfa HealthCare original spare parts.
•     Use only tools and measuring instruments which are suitable for the procedure.
•     Only approved Agfa HealthCare accessories must be used. For a list of
      compatible accessories contact your local Agfa HealthCare organization or
      www.agfa.com.

INSTRUCTION:

 

NOTE:

To verify the latest version of a chapter of the Service Manuals refer to the "Checklist
for Completeness" in the Agfa HealthCare Library.

Manufacturer

Published by

All rights reserved.
Technical modifications reserved.

AGFA and the Agfa-Rhombus are trademarks of Agfa HealthCare N.V., Belgium,
or its affiliates.

Agfa HealthCare N.V

Agfa-Gevaert HealthCare GmbH
Tegernseer Landstraße 161
D - 81539 München
Germany

Copyright © 2013 Agfa HealthCare N.V.

Summary of Contents for DRYSTAR 5302 100


















































































































































































































































































































































































































































































Reviews:

No comments