DD+DIS150.05E
Controls, Connections and Set Up Procedures
Printed copies of this document are not controlled.
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
Drystar 5302
Chapter 1 / 21
Sharpness Adjustment at the Modality
Case 1
: Modality sends in page mode:
In case the modality sends the images in page mode (i.e. it does not send
single images to the printer but already the complete, prepared image
information for one film) use Cubic Bell interpolation. It is defined via following
smooth factors:
Cubic Bell smooth factors
Possible range
299 (less sharp) to 200 (very sharp)
Reasonable values
251 (less sharp) to 235 (very sharp)
Default value
245
sharp
too sharp
536601GJ.CDR
less sharp
299
200
245
235
251
Cubic Bell
Interpolation Smooth Factors
299
200
251
245
235
Limits
Legend
Default
Reasonable values
Figure 13
Case 2
: Modality sends in image mode:
In case the modality sends the images in image mode (i.e. it sends single
images to the printer to let the printer compose the single images for one film)
use Cubic High Res interpolation. It is defined via following smooth factors:
Cubic HighRes smooth factors
Possible range
199 (less sharp) to 101 (very sharp)
Reasonable values
148 (less sharp) to 138 (very sharp)
Default value
143
sharp
too sharp
536601GK.CDR
less sharp
199
101
148
143
138
Cubic High Res
Interpolation Smooth Factors
Figure 14
2005-09-09 (Type
5366/100)
Agfa Company Confidential
