- 64 -
EZDigPro
User & Calibration Manual
Position the bucket on the ground at a desired reference point and press the key to zero the depth value.
Now the depth value will be zero at that depth (even in other reach positions) and the distance value to that point will
be shown if the bucket is higher (positive) or lower (negative).
A
Bucket too low:
Negative depth.
A
Bucket too high:
Positive depth.
A
Bucket on grade:
Zero Depth.
(no tilt indications).
A
Bucket on grade:
Zero depth.
[usage]
Zeroing the Target Depth
DEPTH
