- 43 -
EZDigPro
User & Calibration Manual
BOOM 1 - LENGTH
Measure accurately the length of the first boom between the center of pivot A and the center of pivot B.
Move the cursor to highlight Length and set the exact value expressed in the selected unit of measure.
Boom Length (Boom1)
Fig.1
BOOM 1 - SIDE
Select (press ) the Side where the sensor is installed; viewing the excavator from the cab: L = Left and R =
Right.
This setting has to be done for every sensor.
[manual calibration]
Boom 1
BOOM 1 CALIBRAT.
Side L
Length 6.600
Angle 30.0
-Offset 25.0
-Actual 0.0
BOOM 1 CALIBRAT.
Side L
Length 6.600
Angle 30.0
-Offset 25.0
-Actual 0.0
BOOM 1 CALIBRAT.
Side L
Length 6.600
Angle 30.0
-Offset 25.0
-Actual 0.0
BOOM 1 CALIBRAT.
Side L
Length 6.600
Angle 30.0
-Offset 25.0
-Actual 0.0
Enter
Skip this section if you have done automatic calibration