- 80 -
EZDigPro
User & Calibration Manual
Position the bucket on the ground on a desired reference point and keep pressing the key for a couple of
seconds to zero the reach value.
Now the reach value will be zero at that distance (even in other depth positions) and the distance value to that point
will be shown if the bucket is further away (positive) or closer (negative) to the cab.
A
Bucket on grade:
Zero reach.
A
Bucket on the reach
zero reference
A
Bucket too far,
Positive reach
A
Bucket too close.
Negative reach
[usage]
Zeroing the Target Reach
REACH
Advanced Mode
