- 66 -
EZDigPro
User & Calibration Manual
[usage]
Set the Depth Reference
Press to enter the depth setting mode. The correspondent value will flash.
To set the target depth, use these buttons:
Press or to set the desired value. Note: To go down, dial in a negative value! Once you press
the sign changes!
Press to invert the sign (positive / negative).
Press to fast zero the value.
Press to confirm the value and end the setting mode.
The shown depth is now the distance from the actual bucket position to the target depth.
If the bucket is higher in respect to the target depth the value is positive and vice-versa.
Note that this value can be affected by other functions; see following pages for details.
-
DEPTH
A
Elevation offset
Enter
Enter
