- 25 -
EZDigPro
User & Calibration Manual
Sensor Assignm.
To assign a sensor to the correct machine part.
First operation that has to be done on a new system.
Calibration
To calibrate the system with the automatic or manual method.
To be done when all the sensors are already assigned and received.
Mandatory on a new system, new machine, or next-day setup if the sensors won’t be put back on the same locations
(and with the same orientation) as the day before.
Load Default
Reset the system to the factory defaults (calibration deleted!). Strongly recommended after a system update (new
software).
Save
To SAVE all the changes made during the calibration process.
This is mandatory, so you don't lose modified data with a control box power off.
Service Paramet.
Advanced parameters and remote sensors parameters. Password protected; only accessed by service
SetPassw.
You can set a password to protect the calibration menu. Default value is zero (the control box will not prompt for a
password).
See next pages for complete description of every menu
[calibration]
Calibration Menu
SETTING MENU
Sensor Assignm.
Calibration
Load Default
SAVE
Service Paramet.
SetPassw. 0
SETTING MENU
Sensor Assignm.
Calibration
Load Default
SAVE
Service Paramet.
SetPassw. 0
