- 44 -
EZDigPro
User & Calibration Manual
BOOM 1 - ANGLE
Move the cursor to highlight parameter Angle, set the exact boom value in degrees referring to Fig. 2.
See next page for the best method to define boom's angles.
Press and you will see the new offset value acquired.
The system also calculates the correction factor. Offset is the angle difference between the sensor absolute angle
and the real machine boom angle. It can be manually adjusted.
Actual
is the actual real boom angle – valid only after boom angle calibration. Useful to compare immediately after
calibration the real machine angle
.
Boom Angle (Boom1)
Fig. 2
[manual calibration]
Boom 1
BOOM 1 CALIBRAT.
Side L
Length 6.600
Angle 30.0
-Offset 25.0
-Actual 0.0
BOOM 1 CALIBRAT.
Side L
Length 6.600
Angle 30.0
-Offset 25.0
-Actual 0.0
Enter