Installation and Configuration
Npaq MR Hardware Manual
Chapter 2: Installation and Configuration
2.1. Unpacking the Chassis
Visually inspect the container of the Npaq MR for any evidence of shipping damage. If any such damage
exists, notify the shipping carrier immediately.
Remove the packing list from the Npaq MR container. Make sure that all the items specified on the packing
list are contained within the package.
D A N G E R : Cables should not be connected to or disconnected from the Npaq MR drive
chassis while power is applied, nor should any drive modules be removed or inserted into it with
power applied. Doing so may cause damage to the system or its components.
A documentation package is provided with the Npaq MR either in a large manilla envelope or on the
installation device containing manuals, interconnection drawings, and other documentation pertaining to the
Npaq MR system. This information should be saved for future reference. Additional information about the
Npaq MR system is provided on the Serial and Power labels that are placed on the Npaq MR chassis.
The system serial number label, located on the rear of the chassis, contains important information such as
the:
l
Customer order number (please provide this number when requesting product support)
l
Drawing number
l
System part number
The AC power input label is located beside the AC power inlet and contains the factory configured AC power
requirements.
For label locations, refer to
www.aerotech.com
Chapter 2
13
