3.3. Analog Outputs [-EB1]
The analog output can be set from within a program or it can be configured to echo the state of select
servo loop nodes.
The analog output is set to zero when you power on the system or reset the drive.
Table 3-11:
Analog Output Specifications [-EB1]
Specification
Value
Output Voltage
-10 V to +10 V
Output Current
5 mA
Resolution (bits)
16 bits
Table 3-12:
Analog Output Connector Pinout [-EB1]
Pin # Description
In/Out/Bi
Connector
1
Analog Output 1
Output
2
Analog Output 2
Output
3
Analog Output 3
Output
4
Ground
N/A
Table 3-13:
Mating Connector Part Numbers for the Analog Output Connector [-EB1]
Type
Aerotech P/N
Third Party P/N
Wire Size: mm
2
[AWG]
4-Pin Terminal Block
ECK02399
Phoenix 1768004
0.5- 0.14 [20-26]
Figure 3-8:
Analog Output Typical Connection [-EB1]
XL5e Hardware Manual
3.3. Analog Outputs [-EB1]
www.aerotech.com
87
Summary of Contents for Automation1 XL5e
Page 1: ...Revision 1 01 Automation1 XL5e High Performance Linear Digital Drive HARDWARE MANUAL...
Page 22: ...Figure 1 4 Dimensions EB1 1 2 2 Dimensions XL5e Hardware Manual 22 www aerotech com...
Page 63: ...Figure 2 32 PSO Interface XL5e Hardware Manual 2 5 Auxiliary I O Connector www aerotech com 63...
