26
For example, press the
button twice followed by the
button to highlight the COMMISSION option (as
shown below) and then press the
✔
button to select this option.
[LIGHT MONITORING SYSTEM – (Level 2)]
TEST VIEW LOCK CONTROLS
TIME/DATE STATUS
COMMISSION
Press the
‘Esc’
button
from within a menu option to return to the previous menu.
Press the
‘Esc’
button
from the Main Level 2 Menu (shown above) to return to the normal operating display.
3.2.4.1.2 Selecting Individual Zone Numbers
When the display is showing a list of Zone Numbers, it is possible to select a specific zone number by using the
number keys. For example, if the display is showing a list of zones:
[ Inputs] More>
Zone Mode Location
0001
Enabled
BASEMENT WEST
0002 Enabled BASEMENT EAST
0008 Enabled GROUND FLOOR
0009 Enabled MAIN RECEPTION AREA
To select a particular Zone, move to the zone number column. The existing zone number will then be
highlighted. Enter the required Zone Number using the number buttons, for example 12.
[ Inputs] More>
Zone Mode Location
# 12
Enabled BASEMENT WEST
0002 Enabled BASEMENT EAST
0008 Enabled GROUND FLOOR
0009 Enabled MAIN RECEPTION AREA
Finally press the
✔
button to confirm. The display will then show a new list of Zones with the selected Zone
highlighted at the top of the list. If the number is entered incorrectly, press the
‘Esc’
button.
3.2.5
Test
The test menu provides facilities to test the luminaires (by group or individually) and the display.
[Test Menu]
LIGHTS
DISPLAY
Select the required test function. The details for each test function are described below.