12
2.2.5
Recommended Cable Routing Arrangement
Internal arrangement showing recommended routing of cables.
It is recommended that the
routing arrangement shown
in the diagrams opposite
be employed.
Segregate the SELV low
voltage wiring (Loop
Circuit, Network and AUX
Supply) from the AC Mains
Wiring and any wiring
connected to the relay
contacts and modem
telephone connection lead.
Eyelets are provided in the
rear of the back box to
enable the cables to be
securely fastened using tie-
wraps.
Cable screens / shields
should be connected to the
back box using the
threaded studs provided
near the knockout holes.
Multi-way Bus bars are
available separately for
mounting on the threaded
studs.
Refer to
further information on cable
types to be used.
Refer to specific sections
on how to install AC Mains
input and loop, phone,
relay and AUX outputs
circuits.
9400, 9400/D
9800
Use front
knockout rows
for upper
chassis cables
Use rear
knockout rows
for lower chassis
cables
Route battery
cables through
hole in upper
battery shelf
–
Ensure that the
hole is protected
by a grommet.
Field
Installation
Wiring
Battery Wiring
