25
3.2.4
Menu Functions
The following Menu Functions are available at Level 2. The display shows the primary Level 2 Menu as follows:
[LIGHT MONITORING SYSTEM – (Level 2)]
TEST
VIEW LOCK CONTROLS
TIME/DATE STATUS COMMISSION
The following table gives a list of the Level 2 Menu Functions, the sub-functions available within each main
function and a brief description for each function.
Main Menu Option Sub Menus
Comments
TEST
Lights
Immediately Test a Group of Luminaires or an Individual
Luminaire.
Display
Test the Graphics Display, Status Indicators and Keyboard.
VIEW
Faults
View Zones and Inputs that are reporting a fault condition.
Log
View the Event Log.
Inputs
View the current state of Luminaires and other inputs.
Outputs
View the current operational condition of all output
circuits/devices.
Panel
View the operational state, voltage and current loading of the
panel input and output circuits.
Network
View Network diagnostics
LOCK CONTROLS
---
Lock the control keys and inhibit the menu functions.
TIME / DATE
---
Change the Date and Time
STATUS
---
Return the display to the normal status display indications.
COMMISSION
---
Enter the Level 3 Commissioning and Panel Programming
Functions
Test Results
Print the test results for the selected group
Log
Print the event log
Feed Paper
Feed the paper by one blank line
Stop
Stops the current printing operation and clears the print queue.
Set-up Printer
Configure the printer option
The printer must be configured before printing can be initiated.
3.2.4.1 Using the Buttons to Navigate Menus
Press the
‘Menu’
button to bring up the display menu.
3.2.4.1.1 Selecting Menu Options
The Level 2 Menu is shown below:
[LIGHT MONITORING SYSTEM – (Level 2)]
TEST
VIEW LOCK CONTROLS
TIME/DATE STATUS COMMISSION
Press the
buttons to highlight the required menu option and then press the
✔
button to select it.
