40
4.3.1
Loops
On selecting the LOOPS option, the display will prompt for the loop to be viewed / programmed. For example: -
[Select Loop]
1st-Loop
2nd-Loop 3rd-Loop 4th-Loop
x x
The list of loops available will be adjusted automatically to show only those loops that have a loop driver card
installed. In the above example, loop drivers are installed in positions 1 and 2.
Press the
buttons to scroll through the list of loops available and then press the
✔
button to select the
loop required.
The display will then show a list of programming options as follows:
[Loop 1]
VIEW/EDIT
AUTO LEARN SEARCH PLU
DRIVER
4.3.1.1 Loops - View/Edit
The VIEW/EDIT option shows a list of the devices connected to the loop learnt by the panel. For example, page
1 shows:
[Loop 1] More>
Address State
001.0
Normal
002.0 Normal
003.0 Normal
004.0 DEVICE MISSING
The first device on the loop is shown at the top of the list and is highlighted. Whenever an address is
highlighted, press the
buttons to scroll through the list of devices.
Press the
buttons to view additional information. The display highlights a particular parameter. To change
the value of this parameter (if not view only), press the
✔
button and appropriate options will be shown on the
display.
Press the
button to show page 2 as follows: -
[Loop 1] More>
Address TestGroup Zone Description
001.0
2 0200
002.0 1 0200
003.0 2 0200
004.0 1 0200
Press the
button to select and highlight in turn, the Test Group field, the Zone field and the Description field.
Press the
button again to show the device detail information views, as follows, for each device type.
