manualshive.com logo in svg

ADTX ArrayMasStor, User Manual, Page: 39 / 79

Share
Download
ADTX ArrayMasStor User Manual Download Page 39

Advanced Technology and Systems Co., Ltd.

3 0

4.5 

SCSI ID Information

SCSI ID information can be seen at the main menu by pressing the up
and down buttons.

4.6 

  Display System Configuration

From the main menu, use the up or down button to display the
configuration menu. Press the select button to choose the
configuration menu, and then use the up or down button to select the
items to be displayed.

4.6.1

 

 Number of Drives

This displays the number of drives installed in the ArrayMasStor.

4.6.2

 

 Hot Spare Drive

When a spare drive is installed and configured, SPARE ASSIGNED
appears.  If the spare drive is not installed and configured, NO
SPARE DRIVE appears.

4.6.3

 

Buzzer Mode

The on/off status of the buzzer is displayed.  When the buzzer is on,
it beeps when a failure occurs.

4.6.4

 

Automatic Reconstruction Mode

When automatic reconstruction mode is turned on, data
reconstruction starts automatically when a replacement drive is
installed.  If both the hot spare drive and auto reconstruction mode
are enabled, data reconstruction on the spare drives starts
automatically after a drive fails.  When automatic reconstruction
mode is turned off, after a failed drive has been replaced, DRIVE
REPLACED  – START RECON appears on the display.  Data
reconstruction can now be started (see section 4.2.4, Data
Reconstruction).

RAID SUBSYSTEM

-CONFIGURATION

CONFIGURATION

  4 DRIVES ONLINE

CONFIGURATION

  NO SPARE DRIVE

CONFIGURATION

  BUZZER ON

  RAID SUBSYSTEM

  SCSI ID     0/0

CONFIGURATION
  AUTO RECON ON

Summary of Contents for ArrayMasStor
















































































Reviews:

No comments