ArrayMasStor J Series User’s Manual
1 7
OS
: System 7.1 or above
•
The drive formatter provided with Apple computers only recognizes drives supplied by Apple
Computer. In order to format the ArrayMasStor for use with a Macintosh, a hard disk formatter
from a third party is necessary. The Hard Disk Tool kit by FWB is recommended.
•
The ArrayMasStor does not support blind transfer. Please set the transfer mode to non-blind
transfer.
•
Each partition has a maximum capacity of 2GB on a system 7.0 and 4GB on a system 7.5. If the
ArrayMasStor’s capacity exceeds these limitations, the entire storage capacity should be divided
into several smaller partitions.
3.10 Connection to the UNIX Systems
•
The UNIX C/H/S mode must be set before the ArrayMasStor is connected to the following
operating systems:
Solaris (SPARC)
2.X
IRIX
5.X
•
The configuration file in Sun OS (Solaris 2.5.1/2.6) must be edited to use the LUN.
Example (To set two LUNs to the ArrayMasStor J Series at SCSI ID 0)
SPARC station5 Turbo 170M
File name to edit : /kernel/dev/sd.conf
Before Edit
After Edit
name=”sd” class=”scsi”
name=”sd” class=”scsi’
target=0 lun=0;
target=0 lun=0;
:
name=”sd” class=”scsi”
:
target=0 lun=1;
:
:
name=”sd” class=”scsi”
name=”sd” class=”scsi”
target=15 lun=0;
target=15 lun=0;
PC-AT (for Intel) Adaptec AHA-2940UW
filename to edit : /kernel/dev/cmdk.conf
Before Edit
After Edit
name=”cmdk” class=”scsi”
name=”cmdk” class=”scsi”
target=0 lun=0;
target=0 lun=0;
:
name=”cmdk”
class=”scsi”
:
target=0 lun=1;
:
:
name=”cmdk” class=”scsi”
name=”cmdk” class=”scsi”
target=15 lun=0;
target=15 lun=0;
After editing the configuration file, re-boot the system with the boot option “-r”.
If the file is change correctly, the new LUN will appear on the ArrayMasStor’s display when
it is restarted.