Section 5 User Interface Guide
TRACER 6000 Series Split System Manual
84
612806320L1-1B
> F
IRMWARE
U
PGRADE
U
TILITY
Figure 32 on page 84 shows the Firmware Upgrade Utility menu page, which contains the parameters for
performing a firmware upgrade for the local and remote systems.
Figure 32. Firmware Upgrade Utility
> F
IRMWARE
U
PGRADE
U
TILITY
> F
ILE
X
FER
M
ETHOD
Lists the available transfer methods for updating the TRACER system. The following selections are
available:
> F
IRMWARE
U
PGRADE
U
TILITY
> TFTP S
ERVER
(Available for TFTP transfers only.)
Configures the IP address of the TFTP server on which the update file
resides. The TRACER uses this field to locate the network TFTP server and request the file transfer.
> F
IRMWARE
U
PGRADE
U
TILITY
> TFTP F
ILENAME
(Available for TFTP transfers only.)
Specifies the name of the update file to retrieve from the TFTP server.
Enter the full filename for the file. Some TFTP servers require the full path name for any file not located in
the default directory. Refer to the TFTP software documentation for more details.
TFTP L
OCAL
MGMT P
ORT
Upgrade the firmware using a trivial file transfer protocol (TFTP)
server that is located on the same Ethernet network as the local
system. TFTP transfers files by specifying an appropriate server
address and filename.
TFTP R
EMOTE
MGMT P
ORT
Upgrade the firmware using a TFTP server that is located on the same
Ethernet network as the remote system. TFTP transfers files by
specifying an appropriate server address and filename.
XMODEM
Upgrade the firmware using XMODEM software on a terminal or PC
that is connected to the
CRAFT
interface of the local system.
