612806320L1-1B
Copyright © 2005 ADTRAN, Inc.
105
DLP-6
Updating the Firmware Using XMODEM
Introduction
The TRACER 6000 Series split system supports firmware updates of the local and remote systems using
TFTP or XMODEM. Use the TRACER 6200 10/100BaseT/TX
MGMT
port and TFTP from a network
server or XMODEM (if your Telnet client supports file transfers), or use XMODEM and the
CRAFT
interface. This procedure outlines the steps for a successful firmware upgrade using the
CRAFT
interface
and XMODEM software. The same XMODEM steps apply for file transfers through your Telnet client
(refer to your Telnet client documentation for more details on file transfer specifics). (See DLP-5,
Updating the Firmware Using TFTP
, on page 101 for instructions on using TFTP.)
Tools and Materials Required
•
VT100 terminal or PC with VT100 terminal emulation software
•
XMODEM software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
