ADTRAN Atlas 800 Plus, User Manual

Page: 92 / 210

Chapter 7. Modules Terminal Menu
7-6 ATLAS 800
PLUS
User Manual 61200226L1-1
»» Test Initiates different types of tests and displays test results.
Code Write security:2; Read security:5
Matches the line code of the circuit to which it is connected
(available from the network supplier).
Tx Yellow
Write security:3; Read security:5
(Auto Tx Yellow Alarm) Enables and disables the transmit-
ting of yellow alarms.
Tx PRMs Write security:3; Read security:5
(Transmit PRMs) Enables and disables the sending of PRM
data on the facility data link (FDL). The PRM data continues
to be collected even if XMIT PRM is disabled (possible only
with ESF format).
LBO
Write security:2; Read security:5
(Line Build Out) Depends on whether the circuit is provi-
sioned for DS1 by the telephone company.
LB
Accept Write security:3; Read security:5
(Loopback Accept) Sets unit to accept or reject the in-band
loop up and loop down codes as defined in ANSI T1.403. This
is a line loopback.
Pulse
Density
Enforcer
Write security:3; Read security:5
Enables or disables the Pulse Density Enforcer for this T1 cir-
cuit.
These Test commands temporarily disrupt service.
Prt Identifies the port number.
Loc LB
Read security:5
(Local Loopback) Causes loopback on near-end port
Line
Metallic loopback
Payld
Payload loopback framing and clocking are
regenerated.