ADTRAN Atlas 800 Plus, User Manual

Page: 143 / 210

Chapter 11. Updating Firmware
61200226L1-1 ATLAS 800
PLUS
User Manual 11-3
When the update process has successfully completed,
Idle
displays in the
Current Update Status field and
Module Update Complete
displays in the
Previous Update Status field. Either the module restarts immediately and
resumes operation, or it restarts at the specified time and day of the week—
depending on your selection.
If an error occurred during the update process, Previous Update Status
displays an appropriate error message.
Figure 11-1. Update Firmware Menu Interface
8
From the terminal emulation software, begin the XMODEM upload
by using the appropriate command sequence. (If necessary, refer
to terminal emulation software documentation for help. Also, when
specifying the filename, ensure that the file transferred is the one
provided by ADTRAN. Otherwise, the update will not complete
successfully.)
Because XMODEM data is being transferred in-band through
the menu interface, the VT-100 menus of ATLAS will be
inoperable from the Chain-In port. You can cancel the update
at any point in time within the terminal emulation software.
(Please consult the documentation provided by the terminal
emulation software to determine how to do this.)
9
To update additional modules, begin at step 3 and repeat this
process.
Instructions for Updating Firmware Using XMODEM (Continued)
Step Action