ADTRAN Atlas 800 Plus, User Manual

Page: 106 / 210

Chapter 9. Dedicated Circuit Backup and Circuit Status
9-2 ATLAS 800
PLUS
User Manual 61200226L1-1
Configuration
First, configure your dedicated maps normally. Refer to Chapter 8 for more
information on configuring Dedicated Maps. One thing to remember is that
the endpoint receiving the backup data (i.e., the Nx endpoint) needs to be in
the
From column.
All dedicated circuit dial backup configuration is the Dial Plan/User Term
menu. For Slot/Svc , select Circuit Backup . When you select Port/PEP , you
should get a list of all endpoints that are available for backup configuration.
For information on configuring In#Accept and Out#Reject lists, see Chapter
10.
Under Dial Plan/User Term/Interface Config (see Figure 9-2), several op-
tions are applicable only for Originating endpoints, and will not display for
Answer endpoints.
Figure 9-2. Interface Config Menu
To help you follow the terminal menu hierarchy, the following notations are used.
>
MENUS
» Submenus
»» Sub-submenus