ADTRAN Atlas 800 Plus, User Manual

Page: 47 / 210

Chapter 3. Operating the ATLAS 800PLUS
61200226L1-1 ATLAS 800
PLUS
User Manual 3-5
After connecting a VT-100 terminal or a computer running VT-100 terminal-
emulation software to this port, you may need to press
Ctrl-R to refresh the
display.
When you begin the VT-100 session, you will be prompted for a password.
The default password is
password (which is a Level 0 superuser password).
You can change this password using the Access Passwords option, which
is only accessible through the terminal menu. See Access Passwords on page
6-11 for details.
Using T-Watch PRO
T-Watch PRO is the ADTRAN Microsoft Windows management software
program designed to control TSU units from a remote PC. It provides limit-
ed control over the configuration of the ATLAS 800
PLUS
using a graphic in-
terface. Currently, you can choose ATLAS 800
PLUS
from a list of products,
and T-Watch PRO automatically initiates a Telnet session by which you can
connect to and manage the ATLAS 800
PLUS
Base Unit. Currently,
T-Watch PRO automatically receives SNMP traps from an ATLAS 800
PLUS
.
Instructions for Setting Up an ATLAS 800 for VT-100 Terminal Mode
Step Action
1
Set the baud rate on the VT-100 terminal to 9600 baud (8/N/1).
2
Use the Front Panel to set the ATLAS 800
PLUS
baud rate to
match the terminal baud rate. Select 2) CONFIG, S0) SYSTEM,
2) CHAIN PORT, then 1) BAUD RATE.
3
Use the ADTRAN-provided VT-100 terminal adapter to connect
the COM port of a VT-100 compatible terminal, or equivalent, to
the eight-pin modular jack labeled CONTROL on the rear of the
unit. This connection provides both local and remote
configuration.
4
Repeatedly press Enter on the Front Panel until the Login Menu
appears.