ADT iCenter 8142ADT, User Manual

Page: 99 / 136

Advanced System Features (Cont'd)
99
Arm/Disarm Commands
Activation times
1
(Beginning),
2
(End), and
3
(During) are the only valid
choices for automatic arming and disarming functions.
"During" can be used to arm or disarm the control for a specific time only.
For example, if "during" is selected with Arm Stay, the system will
automatically Arm Stay at the beginning of the window and automatically
disarm at the end of the window.
CODE ACTION SPECIFIER
20 Arm-Stay Partition(s)
21 Arm Away Partition(s)
22 Disarm Partition(s)
23 Force Arm Stay (Auto-bypass faulted zones) Partition(s)
24 Force Arm Away (Auto-bypass faulted zones) Partition(s)
Bypass Commands
Activation times
1
(Beginning),
2
(End), and
3
(During) are the only valid
choices for bypass commands. If
3
(During) is selected for auto-bypassing,
the system bypasses the zone(s) specified on a particular zone list at the
beginning of the window and unbypasses the zone(s) at the end of the
window. If it is selected for auto unbypassing, the system removes the
bypass of the zone(s) at the beginning of the window and restores the bypass
of the zone(s) at the end of the window.
CODE ACTION SPECIFIER
30 Auto bypass - Zone list Zone list #
31 Auto unbypass - Zone list Zone list #
Open/Close Windows
Activation time
3
(During) is the only valid choice for these commands.
CODE ACTION SPECIFIER
40 Enable Opening Window by partition Partition(s)
41 Enable Closing Window by partition Partition(s)
42 Enable Access Window for access group Access Group
50 Off-Normal Reminder (Starts local touchpad
beeping if fire off-normal condition exists) None
VistaKey Module Access Control Commands
CODE ACTION SPECIFIER
55 Access Point Grant Access Point #
56 Access Point Grant with Override Access Point #
57 Access Point Protect Access Point #
58 Access Point Bypass Access Point #