ADT iCenter 8142ADT, User Manual

Page: 84 / 136

TeleSMART Messaging Features (cont'd)
84
S
ecurity
S
ystem Menu from a Phone
You can control your security system from a telephone by using TeleSMART.
Action
Enter your access code:
From phone: [#]
[ _ _ _ _ ] [
∗
]
Press [1] to activate the security system mode.
Refer to the table shown below for some of the typical security system commands.
Once you enter the Security System Menu from the telephone, you cannot return to the Main Menu
by pressing a key. Instead, TeleSMART automatically returns to the Main Menu after 10 seconds
of no key presses.
Typical Security System Commands May Include:
COMMAND PRESS
CHECK STATUS
∗
DISARM SYSTEM
Code* +
1
ARM MAXIMUM**
Code* +
4
ARM INSTANT
Code* +
7
ARM AWAY
Code* +
2
ARM STAY
Code* + 3
BYPASS A ZONE(S)
Code* + 6 + 3-digit zone no. to be bypassed
CHIME MODE
Code* + 9
* You must use a security system user code to perform a security system function.
** Not all control panels support “Maximum” arming mode.
Zones greater than 63 are not announced. They can be bypassed, however their status cannot be
announced due to speech limitations..
Refer to your security system’s User Guide for specific commands and procedures.