ADT iCenter 8142ADT, User Manual

Page: 72 / 136

TeleSMART Messaging Features (cont'd)
72
Call
S
creening Using the Tele
S
M
AR
T Touchpad (
O
ptions 14, 15, 16)
09
Touchpad CID
10
Aux CID
11
Aux Volume
12
Toll Saver
13
Message Beeps
14
HF Touchpad
15
HF Aux
16
Handset On/Off
NAVIGATION: [
∗
] = Next Option; [#] = Previous Option; [7] = GOTO prompt; [9] = Exit System.
About Call Screening
Call Screening lets TeleSMART answer your calls while you listen in from any
phone and/or touchpad or auxiliary speaker (depending on programming) without
the caller hearing you.
CALL SCREENING
FROM…
LETS YOU…
Telephone (handset) listen to a caller’s incoming message from the telephone without the
caller hearing you. You can then connect to the call or let TeleSMART
continue recording the caller’s message. This is known as Handset
Call Screening. See how to connect in paragraph below.
Touchpad and/or
Speaker hear a caller’s incoming message at the touchpad and/or auxiliary
speaker without the caller hearing you. You can then pick up a
telephone receiver to connect to the call or let TeleSMART continue
recording the caller’s message. This is known as Hands Free
(abbreviated “HF”) call screening.
How to Connect to a Call when Telephone Call Screening is On
1. Pick up the telephone receiver.
2. As you hear the caller leaving a message, click the “off-hook” button once, in the
same way you would when switching between callers if you had Call Waiting
service. Alternatively, you can press the “flash” key if your telephone has one.
You are automatically connected to the call and you can begin your conversation.
How to Turn Call Screening On/Off
PROGRAM MODE
14 HF KEYPD:OFF
Call Screening at the Touchpad:
1. Go to the “HF Touchpad” prompt (option 14).
2. To turn touchpad Call Screening on, press [0].
To turn touchpad Call Screening off, press [0] again.
PROGRAM MODE
15 HF AUX:OFF
Call Screening at the Auxiliary Speaker:
1. Go to the “HF Aux” prompt. (option 15).
2. To turn speaker Call Screening on, press [0].
To turn speaker Call Screening off, press [0] again.
PROGRAM MODE
16 HANDSET
Call Screening at the telephone:
1. Go to the “Handset” prompt (option 16).
2. To turn telephone Call Screening on, press [0].
To turn telephone Call Screening off, press [0] again.