ADT iCenter 8142ADT, User Manual

Page: 92 / 136

Advanced System Features (Cont'd)
92
Before programming a temporary schedule, use a worksheet similar to the
one below to plan your schedule. This will make it easier when actually
programming the schedule.
ARM/DISARM MON TUE WED THU FRI SAT SUN
Windows
Disarm Window
Start Time HH:MM
Stop Time HH:MM
Arm Window
Start Time HH:MM
Stop Time HH:MM
Programming Temporary
S
chedules
Temporary schedules only affect the partition from which it is entered.
Temporary schedules can be reused at later dates simply by scrolling (by
pressing #) to the DAYS? prompt (described below) and activating the
appropriate days. This should be considered when defining daily time
windows. Note that only users with authority level of manager or higher can
program temporary schedules.
To program temporary schedules perform the following from Console
Emulation mode or through a Custom English Touchpad:
ACTION SCREEN
1. Enter your 4-digit security code, then press
[ # ] [ 8 ] [ 1 ] keys. A menu prompt MON
DISARM WIND. is displayed.
The cursor is positioned on the tens of hours
digit of the start time for Monday's disarm
window. Enter the desired hour. Press [
✴ ] to
move to the minutes field. The minutes are
entered in the same manner. The AM/PM
indication is changed by hitting any key, 0-9,
while the cursor is under the letter A/P position.
Repeat for the stop time entry.
Press [ # ] to move to the next screen display
without making changes.