ADT iCenter 8142ADT, User Manual

Page: 74 / 136

TeleSMART Messaging Features (cont'd)
74
Q
uick
A
ccess Key Using the Tele
S
M
AR
T Touchpad (
O
ption 18)
17
Ring Answer
18
Access Key
19
Caller ID Prog
20
Memory Dial
21
User Code
22
Zone Voice Tag
NAVIGATION: [
∗
] = Next Option; [#] = Previous Option; [7] = GOTO prompt; [9] = Exit System.
About the Quick Access Key
You can assign a Quick Access key that lets users access the TeleSMART system by
simply pressing and holding that key down for 2 seconds (no user code needed). This
makes the system easy to use, since a user does not need to remember an access
code.
Make sure the Quick Access key IS NOT programmed for any other security system
function.
How to Assign the Quick Access Key
PROGRAM MODE
18 ACCESS KEY
1. Go to the “Access Key” prompt (option 18) and press [0].
ENTER ACCSSS
KEY (1-4, 0+OFF)
2. Enter the number corresponding to the desired access key (see
figure below.
3. The system automatically returns to the Main Menu, and the
selected Access key is active.
3 2 1
6 5 4
9 8 7
# 0
*
READY
INSTANT
OFF
CODE
AWAY
TEST
CHECK
STAY
BYPASS
READY ARMED
1
2
3
4
6139ADT-003-V0
I
MP
OR
T
AN
T:
When using the Quick Access key, only the common mailbox is
available for message playback, and the top line of the prompts reads, “User Mode”
rather than “Program Mode.”