ADT iCenter 8142ADT, User Manual

Page: 109 / 136

109
Quick Guide to Alarm System Functions
I
MPOR
T
AN
T:
Use with standard Custom English Touchpad only.
FUNCTION PROCEDURE COMMENTS
Check Zones Press [ ✴ ]. To view faulted zones when system not
ready.
Display All
Descriptors Press and hold [ ✴ ] for 5 seconds. Displays all Custom English descriptors
programmed by installer.
Arm System Enter code.
Press arming key desired (AWAY,
STAY, INSTANT, MAXIMUM).
Arms system in mode selected.
Disarm
System Enter code.
Press OFF [1].
Disarms system and silences alarms.
Bypass zones Enter code.
Press BYPASS [6].
Enter zone numbers to be
bypassed (use 3-digit entries).
Bypassed zones are unprotected and will
not cause an alarm if violated.
Quick Bypass Enter code.
Press BYPASS [6].
Press [#].
Bypasses all faulted zones automatically.
Chime Mode Enter code.
Press CHIME [9].
Touchpad will sound if doors or windows
are violated while system disarmed.
Test Mode Enter code.
Press TEST [5] button
Sounds alarm sounder and allows sensors
to be tested.
View
Messages Press and hold [0] for at least 5
seconds. Message from central station will appear.
View User
Capabilities Enter User's Code.
Press [ ✴ ] + [ ✴ ].
Displays partitions and authority levels
assigned to the user.
GOTO
Partition Enter security code.
Press [
✴
].
Enter partition number (1-8).
0 returns to default partition.
Allows a user at one touchpad to perform
functions in another partition, if that user is
authorized to do so.
Add a User Enter Master/Manager Code.
Press CODE [8].
Enter new user's user number.
Enter code for that user.
At prompt, enter authority for that
user in this partition (1-5).
Follow prompts, 1=Yes, 0=No.
Master and Manager level users can add
users to the system, each with its own
code and authority level.