ADT iCenter 8142ADT, User Manual

Page: 127 / 136

127
Glossary
The following terms are used throughout the guide.
Aux C
I
D On/Off
:
A TeleSMART feature that causes Caller ID information to be
announced at the auxiliary speaker.
Aux Volume
:
A TeleSMART feature that lets you adjust the auxiliary speaker
volume: 1 = low; 2 = medium; 3 = high. Notice that the touchpad volume
adjustment is described in the instructions included with the touchpad.
Arm/Disarm
:
“Armed” simply means that the burglary portion of your system is
turned
O
N and is in a state of readiness. “Disarmed” means that the burglary
system is turned
O
FF, and must be rearmed to become operational. However, even
in a “disarmed” state, “emergency” and “fire” portions of your system are still
operational.
Bypass
:
To disarm a specific area of burglary protection while leaving other areas
operational.
Caller
I
D
:
A service of the telephone company that lets you see or hear the name
and phone number of a caller before you pick up the phone. You must subscribe to
this service to activate certain TeleSMART features.
Caller
I
D Log
: A TeleSMART feature that lets you view the Caller ID information
for calls received.
Call
S
creening
: A TeleSMART feature that lets you “listen-in” while a caller leaves
a message. The caller cannot hear you. You then have the option of answering the
call or letting the system record a message. See also “Hands Free.”
C
I
D Display On/Off
: A feature that causes Caller ID information to be displayed
at TeleSMART touchpads.
Common Mailbox
:
A mailbox to which all users have access.
Day/Night Zone
: An area of protection whose violation causes a trouble indication
during the disarmed (DAY) mode and an alarm during the armed (NIGHT) mode.
Delay Zone
:
An area of protection containing doors most frequently used to enter
or exit (typically, a front door, back door, or door from the garage into the building).
The delay zone allows sufficient time for authorized entry or exit without causing an
alarm. Consult your installer for the entry and exit delay times that have been set
for your system during installation and record them on the separate sheet provided
in this guide.
Distinctive Ring
:
A TeleSMART feature that lets you assign the number of short
rings the phone will make when incoming calls from a particular number are
received.