ADT iCenter 8142ADT, User Manual

Page: 75 / 136

TeleSMART Messaging Features (Cont'd)
75
Caller
I
D
O
ptions Using the Tele
S
M
AR
T Touchpad (
O
ption 19)
17
Ring Answer
18
Access Key
19
Caller ID Prog
20
Memory Dial
21
User Code
22
Zone Voice Tag
NAVIGATION: [
∗
] = Next Option; [#] = Previous Option; [7] = GOTO prompt; [9] = Exit System.
A
bout Caller
I
D
Caller ID can only be accessed by Custom English Touchpad 6139T or by the
Compass Downloader (if Caller ID service is available and you subscribed for it
through your telephone provider.)
TeleSMART allows you program the way the system responds to incoming calls
from up to 25 different phone numbers.
Caller ID Option Programming lets you:
•
set a distinctive ring for certain phone numbers
•
assign a mailbox where messages from a number are automatically recorded
•
record a voice tag for certain phone numbers.
How to Program Caller ID Options
PROGRAM MODE
19 CALLER ID TBL
1. Go to the “Caller ID Tbl” prompt (option 19) and press [0].
CID LOCATION: 01
1-SELECT
2. Select from the options described below.
(Pressing [
∗
] or [#] displays the choices on the bottom line.)
Caller ID Menu
1 – Select Location Lets you enter a Caller ID location (01-25) to
store the settings (see “Enter Location”
prompt below).
2 – Review Displays the selected location’s settings.
3 – Erase Erases the settings for the selected location.
4 – Next Shows the CID settings in the next location.
5 – Previous Shows the CID settings in the previous
location.
6 – Program Starts the Caller ID Program Menu.
8 – Menu Returns to the beginning of the Program
Menu.